Use trowel, squeegee or brush to apply the layers to be about 2-3 mm thickness (1/8 INCH). Multiple coats in cross directional are recommended. Use quality fibermesh between coats for extra strenght.

CEMENT BASED SLURRY
2 PARTS DRY MIX 1 PART LIQUID ADDITIVE
COLOR: GREY/ WHITE
OPEN TIME: 30 MINUTES
APPLICATION TEMPERATURE: 8-30 C
DRY/ CURE TIME: 7 DAYS AT 20-30 C

Wet rooms: 2.5-3 kg/M2 (2 layers)
Water tanks, pools and terraces: 3,5-4 kg/m2 (2 layers)

12 Months in dry condition in unopened packaging

Avoid contact with the eyes and skin. Avoid inhaling the vapors and wear suitable protective clothing covering the skin including eye protection, gloves and suitable respirators. Keep out of the reach of children.

Flush eyes and wash skin thoroughly with clean water. If inhales, vacate are a immediately. Seek medical attention if irritation persists. If swallowed do not induce vomiting. Drink plenty of clean water and seek medical attention immediately.

Maintain work area and keep it clean. Keep out of sewers and storm drainage.

Follow above safety indtructions and collect in disposal containers in accordance to local disposal requirements.

The manual handling of this product without due care and attention could result in physical injury. Wear back supports and use team lifting when manual lifting is required. Follow OSHA recommendations.

Updated Material Safaty Data Sheet (MSDS) and Product Data Sheet (PDS) are available at KEMSET.COM

KEMSET USA warrants this product to be of merchantable quality when used or applied inaccordance with the instructions herein. The product is not warrented as suitable for any purpose or use other than the general purpose for which it is intended. Liability under this warranty is limited to the replacement of product found to defective as purchased. In the event of a claim under this warranty, notice must be given to KEMSET USA in writing. This limited warranty is issued and acceptes in lieu of other express warranties and expressly excludes liablity for consequential damages.