DESCRIPTION:
ACRYLIC WATER BASED EMULİSON, HIGHLY ELASTIC, WATER VAPOR PERMEABLE, WATER REPELLENT, LIGHWEIGHT, DECORATIVE PLASTER COATING.
SURFACE PREPARATION:
Surfaces must be structurally sound, clean, and free of dust, dirt or other contaminates impairing bond. Prepare the surface to be smooth and free od cracks, holes and voids.
PRIME:
Apply even single coat of Kemset Coarse Primer for better bonding. Allow Primer to dry 4-6 hours before applying Kemcoat.
TYPES OF APPLICATIONS:
On smooth finished plasters, concrete surfaces, on EIFS systems top coat, on exterior/ interior plasterboard, etc.
Apply using flat steel trowel on steep angle to spread to thickness of largest aggregate size in that type of Kemcoat finish you are using. (fine/medium/coarse).
Maintain wet- edge while working on manageable area.
Wait until the Kemcoat sets slightly before start texturing. (Time is depending on weather conditions).
Use hard plastic float in circular and/or straight motions to achieve desired finish.
WARNING – HAZARDOUS
MAY COUSE IRRITATION
RISK: May cause respiratory, skin and eye irritation.
Avoid contact with the eyes and skin. Avoid inhaling the vapors and wear suitable protective clothing covering the skin including eye protection, gloves and suitable respirators. Keep out of the reach of children.
Flush eyes and wash skin thoroughly with clean water. If inhales, vacate are a immediately. Seek medical attention if irritation persists. If swallowed do not induce vomiting. Drink plenty of clean water and seek medical attention immediately.
Maintain work area and keep it clean. Keep out of sewers and storm drainage.
Follow above safety indtructions and collect in disposal containers in accordance to local disposal requirements.
The manual handling of this product without due care and attention could result in physical injury. Wear back supports and use team lifting when manual lifting is required. Follow OSHA recommendations.
Updated Material Safaty Data Sheet (MSDS) and Product Data Sheet (PDS) are available at KEMSET.COM
KEMSET USA warrants this product to be of merchantable quality when used or applied inaccordance with the instructions herein. The product is not warrented as suitable for any purpose or use other than the general purpose for which it is intended. Liability under this warranty is limited to the replacement of product found to defective as purchased. In the event of a claim under this warranty, notice must be given to KEMSET USA in writing. This limited warranty is issued and acceptes in lieu of other express warranties and expressly excludes liablity for consequential damages.
WARNING: This product contains impurities known to the State of California to cause cancer and/or birth defects or other repoductive harm.
Keep out of the reach of children.
There are no reviews yet. Be the first to review “THERMOPAINT” Your email address will not be published. Required fields are marked *
Your Rating:*
Copyright © 2023 www.kemset.com - All Rights Reserved Designed & Developed By WEB & MARKETING EXPERTS LLC