Sale!

THERMOPAINT

$175.00

HELPS KEEP HOT OR COLD RADIATION AWAY BUILDING EXTERIOR SUFACES REPELLES HEAT OR COLD RADIATION.

LOW HEAT OR COLD ABSORBTION AND RETENTION VALUE

 

DESCRIPTION:

ACRYLIC WATERBASED EMULSION, RADIANT HEAT REPELLENT, HIGHLY ELASTIC, WATER-VAPOR PERMIABLE, WATER REPELLENT.

SURFACE PREPARATION:

Surfaces must be structurall sound, clean, dry and free of dust, dirt or other contaminates inpairing bond. Prepare the surface to be smooth and free of cracks, holes and voids.

PRIME:

Apply even single coat of KEMSET FLEX PRİMER for better bonding. Allow primer to dry 4-6 hours before THERMOPAINT application

Description

TYPES OF APPLICATIONS:

On smooth finished pasters, concrete surfaces, on EIFS systems as top coat, on exterior/interior plasterboards, etc.

Apply using brush or rollers. Maintain wet edge.

RAIDIANT REFLECTİVE

MICRO GLASS

SPECIFICATIONS:

WATER BASED ACRYLIC

MINERALS AND GLASS RADIANT PAINT COVERAGE: 1,20-1,35 kg/m2 (1-1,5 mm thickness)

DRYING TIME: 12 hours

FIRE CLASS: Bs1 (En 13501-1)

NOT COMBUSTABLE

BOND STRENGHT: 1,50 N/mm2

SUN LIGHT Reflection: 65%

HEAT RADIATION Transfer Rate: 63%

 

WARNING – HAZARDOUS
MAY CAUSE IRRITATION

RISK: May cause respiratory, skin and eye irritation.

Avoid contact with the eyes and skin. Avoid inhaling the vapors and wear suitable protective clothing covering the skin including eye protection, gloves and suitable respirators. Keep out of the reach of children.

Flush eyes and wash skin thoroughly with clean water. If inhales, vacate are a immediately. Seek medical attention if irritation persists. If swallowed do not induce vomiting. Drink plenty of clean water and seek medical attention immediately.

Maintain work area and keep it clean. Keep out of sewers and storm drainage.

Follow above safety indtructions and collect in disposal containers in accordance to local disposal requirements.

The manual handling of this product without due care and attention could result in physical injury. Wear back supports and use team lifting when manual lifting is required. Follow OSHA recommendations.

Updated Material Safaty Data Sheet (MSDS) and Product Data Sheet (PDS) are available at KEMSET.COM

 KEMSET USA warrants this product to be of merchantable quality when used or applied inaccordance with the instructions herein. The product is not warrented as suitable for any purpose or use other than the general purpose for which it is intended. Liability under this warranty is limited to the replacement of product found to defective as purchased. In the event of a claim under this warranty, notice must be given to KEMSET USA in writing. This limited warranty is issued and acceptes in lieu of other express warranties and expressly excludes liablity for consequential damages.

 

WARNING: This product contains impurities known to the State of California to cause cancer and/or birth defects or other repoductive harm.

Keep out of the reach of children.

 

Download Product Details

Material Safety Data Sheets

Reviews

There are no reviews yet.

Be the first to review “THERMOPAINT”

Your email address will not be published.