ELASTICOTE 450
$ 188
$ 235


PRODUCT DESCRIPTION:

Viniyl modifies anionic, Acrylic based, Elastic, Fiber reinforced, Wateproofing top coat. Highly resistant to weather conditions such as moisture and salt sprey. It aso provides respiration to the surface.

APPLICATONS:

-Positive side waterproofing of inclined roofs, decks, floors, gutters

-Cool roof coating to save energy (high solar reflection value), TSR 67%

-Cool roof coanting to prolong roofing lifespan of roofing materilas

-Waterproofing underlayments for tiles and stones (sandwiched as membrane)

-Adheres to concrete, wood, brick, metal surfaces

  • Speed: 750 RPM
  • Power Source: Cordless-Electric
  • Battery Cell Type: Lithium
  • Voltage: 20 Volts
  • Battery Capacity: 2 Ah
Availability: In Stock
  • Category: Elastic Coatings

-No standing water/ pubddle recommended for prolonged time.

-No exessive foot traffic.

Surface must be structurally sound, clean and free of dust, dirt or other contaminates impairing bond. Prepare the surface to be smooth and free of cracks, holes and void.

It is recommended to prime the surfaces using Kemset Flex Primer. Wait 4-8 hours before coating. Follow instructions on Kemset Flex Primer label.

Thin with water by 15-20% for a single coat. The second coat is applied without thinning.

0,8-1,1 Kg/m2 depending on surface conditions and application texture.

At 20°C, Initial Drying: 3-4 hours, Final Drying: 24 hours
APPLY USING BRUSH OR ROLLERS

 

EKOPLAST 450

 

WARNING – HAZARDOUS

MAY COUSE IRRITATION

RISK:May cause respiratory, skin and eye irritation.

SAFETY: Avoid contact with the eye and skin. Avoid inhaling the vapors and wear suitable protective clothing covering the skin including eye protection, gloves and suitable respirators. Keep out of the reach of children.

FIRST AID: Flush eyes and wash skin thoroughly with clean water. If inhaled, vacate area immediately. Seek medical attention if irritation persists. If swallowed do not induce vomiting. Drink plenty of clean water and seek medical attention immediately.


SPILLS LEAKS: Maintain work area and keep it clean. Keep out of sewers and storm drainage.


DISPOSAL: Follow above safety instructions and collect in disposal containers in accordance to local disposal requirements.


MANUAL HANDLING: The manual handling of this product without due care and attention could result in physical injury. Wear back supports and use team lifting when manual lifting is required. Follow all OSHA recommendations.


ADDITIONAL INFORMATION/UPDATES: Updates Material Safety Data Sheet (MSDS) and Product Data Sheet (PDS) are available at KEMSET.COM


WARRANTY: KEMSET USA warrants this product to be of merchantable quality when used or applied in accordance with the instructions herein. The product is not warranted as suitable for any purpose or use other than the general purpose for which it is intended. Liability under this warranty is limited to the replacement of the product found to defective as purchased. In the event of a claim under this warranty, notice must be given to KEMSET USA in writing. This limited warranty is issued and accepted in lieu of other express warranties and expressly excludes liability for consequential damages.

WARNING: This product contains impurities known to the State of California to cause cancer and/or birth defects or other repoductive harm.

Keep out of the reach of children.

TECHICAL SPECS:
Elasticity: 300-400%
Total sun reflection (TSR): 45-55%
Appliction ambient temperature: (+5 C) – (+35 C)
Nonflammable
Humidity and salt water resistant
Storage: 12 months in unopened packaging

Reviews

There are no reviews yet. Be the first to review “THERMOPAINT” Your email address will not be published. Required fields are marked *

Your Rating:*

Save my name, email, and website in this browser for the next time I comment.

Download Product Details

Material Safety Data Sheets